How thick can you pour ARDEX?
ARDEX K 521™ is a pourable, polishable, self-leveling topping for fast-track resurfacing of indoor concrete. ARDEX K 521 can be installed from a minimum thickness of 3/8″ (9 mm) up to a maximum thickness of 2″ (5 cm).
What is ardex self-leveling?
ARDEX K 301™ Exterior Self-Leveling Concrete Topping is a self-leveling topping and underlayment for fast-track resurfacing and smoothing for exterior and interior applications over concrete and approved, properly prepared, non-porous surfaces, including terrazzo, epoxy coatings and ceramic and quarry tile – on, above …
How thick can ARDEX FEATHER FINISH be?
ARDEX FEATHER FINISH can be easily applied with a steel trowel, and used at a true feather edge, or up to 3mm in thickness. For thicknesses of 3mm, and not exceeding 12mm, it is recommended to build up in thin applications or alternatively consult the ARDEX ARDURAPID A 45 datasheet.
How thick can you apply ARDEX FEATHER FINISH?
ARDEX FEATHER FINISH is designed specifically for very thin smoothing applications typically 1mm thick or less, but may be used up to 3mm thick in one application. For thicknesses of 3mm (not exceeding 12mm) it is recommended to build up in thin applications or alternatively consult the ARDEX A 45 data sheet.
Can you epoxy over ardex?
ARDEX K 15® is the original and the most specified self-leveler in North America. Install over: interior concrete, terrazzo, ceramic and quarry tile, epoxy coating systems, wood, metal and non-water soluble adhesive residue on concrete; can be installed over concrete treated with certain curing compounds.
How much does self leveling concrete cost?
A good rule of thumb to estimate is that a self leveling concrete floor will cost around $600-850 per 100 square feet.
Why choose Ardex a 29 cement for floor screeds?
ARDEX A 29 cement for floor screeds has been developed to perform in real UK site conditions. Offering unique application and performance benefits to professional screeding contractors; ARDEX A 29 combines excellent workability, speed and performance. approx. 0.27kg ARDEX A 29 cement per m² for each millimetre of screed thickness using a 1:7 mix.
How long does it take for Ardex screed to dry?
ARDEX floor screeds are walkable from only 3 hours, and can receive floorcoverings from as little as 4 hours. Perfect for bonded, unbounded and floating screeds incorporating underfloor heating. Traditional screeds can take months to dry, ARDEX screeds can receive floorcoverings from as little as 4 hours, regardless of thickness.
What support does Ardex provide?
ARDEX is committed to providing the highest level of technical support, from product training to customised system recommendations. This page provides you with a concise overview of ARDEX products together with technical data sheets, safety data sheets, consumption calculators, training and available downloads.
Why choose aardex floor screeds for your project?
ARDEX floor screeds are walkable from only 3 hours, and can receive floorcoverings from as little as 4 hours. Perfect for bonded, unbounded and floating screeds incorporating underfloor heating.