How do I access my Swann DVR remotely?

In: Other

How do I access my Swann DVR remotely?

Using a computer connected to the same router where your DVR or NVR is connected, open a browser and go to www.canyouseeme.org. On the Port to check field, change 80 to 85 and click Check port. Do the same step for port 8000 and 554. NOTE: 85, 8000, and 554 are the default ports of your DVR or NVR.

How can I access my DVR remotely?

Login to your DVR by pressing the menu button on the DVR or on the wireless remote control. When you are prompt to enter a password, just press the OK button on the DVR or remote. The default admin password for the DVR is blank. If you have already setup an admin password for your DVR, then enter this, then press OK.

What is UPnP on Swann DVR?

UPnP ensures that all of the ports that the DVR requires are accessible to it. For this feature to work, it will need to be enabled on both your DVR and router. If you’re not using UPnP (or your DVR/router does not support this feature), you’ll have to manually forward ports from your router to the DVR.

How do I connect my Swann DVR to WiFi?

Article Details

  1. Go to Menu then Network > Wi-Fi.
  2. Click Scan to see a list of available Wi-Fi.
  3. Below that, enter your Wi-Fi password.
  4. The recorder will connect to your Wi-Fi then you need to click OK.

How do I connect my Swann DVR to WIFI without cable?

Setup Swann USB Wi-Fi Antenna on V8 units

  1. Go to Menu then Network > Wi-Fi.
  2. Click Scan to see a list of available Wi-Fi.
  3. Below that, enter your Wi-Fi password.
  4. The recorder will connect to your Wi-Fi then you need to click OK.

Does Swann DVR have WIFI?

Use the USB Wi-Fi Antenna to replace the network cable connecting the DVR/NVR to the internet router. Going wireless on the network connection lets you choose more secretive spots to hide your DVR/NVR, as it no longer needs to reach the router via cable, making your video evidence more secure.

Can Swann DVR connect to WiFi?

You can connect your Swann DVR to the Internet and have remote access to it using a web browser, software, or smartphone.

How do you reset a Swann DVR?

When the unit has fully booted up, press the black button and wait for the DVR to completely reset. 6. Once reset, unplug the power cable, replace the case and screws, and replace the power cable.

How do I add my DVR or NVR to swannview link?

Once SwannView Link is open and it already shows a device at the right, this means it already detects your DVR or NVR. If so, click here and proceed to Modifying existing device. If not, continue to Adding the device on the list. Click on Add Device located to the right. Click OK to save the settings then proceed to changing stream settings.

How do I connect my Swann camera to Google Assistant?

I installed the Swann app called Homesafe and can now view my cameras on my android phone. Through this app was able to link with Google Home. Then on my mobile device through Google Home, add device and ‘works with’ Swann and can access my cameras with Google Assistant. There are youtube videos on the setting up.

Why can’t I connect to my DVR remotely?

It’s natural to have problems with a remote connection to your DVR especially if your mobile data is limited or you are in some area where the bandwidth available is not that high due to the Internet Service Provider limitation.

Does Swann manufacture or support my router?

Swann does not manufacture or support your router, which is why you will need to contact them for support in enabling the information below. Alternatively, open Internet Explorer and type this link into the address bar: http://www.portforward.com/english/routers/port_forwarding/routerindex.htm