Are malarkey shingles good quality?
Malarkey shingles also get good ratings from homeowners. The consensus is that Malarkey shingles are premium and high-quality products, more expensive than traditional asphalt roofing brands like Owens Corning and GAF, backed by above-average warranties.
Are cool roof shingles worth it?
A cool roof reduces energy usage, saving you money, and will also stabilize the temperatures in your unconditioned spaces, like the garage or the bonus room. Installing a cool roof is most beneficial in a warm climate, where the winters are not cold enough to require the inherent heat gain of a traditional roof.
How long do cool roof shingles last?
Cedar shakes or cedar shingles can last for around 30 to 40 years depending on the climate, the presence of any overhanging trees or other vegetation that may cause problems, and the level of maintenance that you or your roofing contractors perform.
What are the different grades of malarkey shingles?
Types of Malarkey shingles. Malarkey sells three types of asphalt shingles: designer, laminated architectural, and 3-tab shingles.
Is Malarkey better than GAF?
Malarkey manufactures top-quality shingles that are better than GAF and Owens Corning. The company focuses on quality, not quantity, so they are not as well-known as CertainTeed and GAF. Malarkey shingles enjoy good ratings from homeowners, contractors, and home inspectors.
How long do Malarkey shingles last?
Roofers as well as building inspectors report that many Malarkey roofs they have seen last well over 30 years and look very good. This is an incredibly long service life compared to other asphalt roofs.
Are cool roofs expensive?
Cool roofs deflect some desired heat gain during the winter. The cost premium for cool roofs versus conventional roofing materials ranges from zero to 5 or 10 cents per square foot for most products, or from 10–20 cents for a built-up roof with a cool coating used in place of smooth asphalt or aluminum coating.
What is the advantage of a cool roof?
Cool roofs can: Lower local outside air temperatures, thereby lessening the urban heat island effect. Slow the formation of smog from air pollutants, which are temperature-dependent, by cooling the outside air. Reduce peak electricity demand, which can help prevent power outages.
Are Cool roof shingles more expensive?
How much does cool roofing cost? According to the EPA, reflective shingles may be the same price as premium standard shingles and between $0.10 and $0.20 more per square foot than regular mid-priced shingles.
Where is malarkey shingles made?
Founded in 1956, Malarkey Roofing Products is a family-owned, US manufacturer of residential and commercial roofing products, with production facilities in Oregon, California, and Oklahoma.
Where is Malarkey shingles made?
Is Malarkey better than CertainTeed?
Both companies are very well-established premium brands that are near the top of the industry in consumer satisfaction and shingle durability ratings. CertainTeed gives you a wider range of quality options, but Malarkey offers enough selection to make their products worth your consideration.
Is metal roof more expensive than asphalt shingles?
Metal roofing is more expensive than asphalt shingle roofing materials. Usually, a good quality standing seam roof or a stone coated steel roof can cost around 2 1/2 to 3 1/2 times as much depending on how difficult the installation is and where it’s located.
What are the types of roof shingles?
3-tab shingles — also referred to as three-tab shingles.
What are the streaks on my roof shingles?
If you live in a humid area of the country, you’ve probably seen unsightly dark streaks on asphalt shingle roofs. Though often attributed to an accumulation of dirt, defective shingles, mold, or mildew; the most common culprit is actually a blue-green algae known as Gloeocapsa Magma that is spread by airborne spores.
Can metal roofs be installed over old shingles?
Before you can install a metal roof over your old shingles, your current roof must meet a few requirements. Make sure that the current shingles are in a single layer. It is not recommended to install the metal roofing over two existing layers of shingles or over uneven shingles.