Can a crack in a hot tub be repaired?

Can a crack in a hot tub be repaired?

Repairing a scratch or crack in your spa’s shell is typically a quick and relatively simple task. In fact, the part that will likely take the longest is draining and refilling your hot tub. But once it’s refilled, you’re done, and you can spend the rest of the afternoon relaxing in your freshly repaired spa.

Why is my hot tub cracking?

Standing Water Deteriorates the Acrylic The hot tub must be emptied, cleaned and treated according to manufacturer instructions to avoid conditions that could deteriorate and weaken the acrylic. If the acrylic becomes to weak, it will be more likely to scratch and crack.

How much does it cost to fix a crack in a hot tub?

The cost to repair a hot tub is $323, ranging from $161 and $496. The total depends on the problem and whether you need to fix or replace it. Sealing a small crack starts around $100, while replacing a two-speed pump runs up to $1,200. From time to time, hot tub spas need repairs to replace worn or defective parts.

Can a cracked fiberglass hot tub be repaired?

Over time, a small crack can increase in size and cause irreparable damage. Fixing a crack in the fiberglass can stop the crack from spreading and extend the life of your hot tub.

Are hot tubs difficult to fix?

Just like everything else around the house, hot tubs break down or require repair from time to time. Parts wear out with use and age, requiring service or replacement. Even the best quality hot tubs require occasional maintenance. Hot tub repair prices vary widely depending on the nature of the repair.

How do I fix a crack in fiberglass?

Here’s how.

  1. Drill a tiny hole at each end of the crack. This will stop the crack from extending any further.
  2. Examine the crack.
  3. Wipe the crack with a dry rag to make sure it’s clean and dry.
  4. Fill the crack with a fair amount of fiberglass epoxy resin, using a plastic applicator.
  5. Let the epoxy dry for a day.

Can you refinish a fiberglass hot tub?

Indoor and outdoor hot tubs can be refinished. Refinishing a hot tub is an option when the acrylic or fiberglass coating has cracks or other damage. New hot tubs can be expensive, so instead of purchasing a new one, repair the damage for much less money.

How do you fix a crack in an acrylic tub?

Mix a two-part polyester filler and apply along the crack, using a rubber spreader. Ensure the crack and the drill holes at the ends are completely filled. Allow the filler to dry completely.

How long do fiberglass hot tubs last?

One might only expect to get 5-10 years out of an inferior shell verses 10-20 years out of a higher quality shell that is, in most cases, fiberglass backed. Maintenance and care can also dramatically affect the lifespan of a hot tub.

How do you repair a hot tub crack?

Wipe the surface of the hot tub along the crack with a soft cloth or paper towel. Sand the fiberglass tub’s surface with 400-grit sandpaper to smooth the area around the crack.

How do you repair a fiberglass tub?

Fill the crack with fiberglass filler. Apply the filler with a putty knife, then scrape the surface of the tub with the knife to remove excess putty around the crack. Allow the putty to dry completely before continuing with the repair.

How do you repair a hot tub?

Apply the rubbing compound that comes with the repair kit to the sanded surface of the hot tub. Use a buffing pad to buff and polish the surface of the hot tub.