Can I install lowering springs myself?

Can I install lowering springs myself?

The process is not difficult, so anyone with garage access and a little know-how can accomplish this modification. Since lowering springs are designed to work with your existing factory suspension, they can simply replace your coil springs.

Is it bad to put lowering springs on your car?

Poorly done or extreme lowering can cause suspension and steering parts to contact each other, the wheels or the tires. It could also cause tires to rub the body during turns or going over bumps.

How much does it cost to get lowering springs installed?

Lowering Springs Installation Lowering spring kits go for anywhere between $100 and $700. A professional installation may cost an additional $200 to $800.

How do you install lowering springs?

  1. Jack up the rear of the car and put it on car stands.
  2. Remove the rear wheels.
  3. Remove the shock nuts and bolts. (You can locate them by referring to the owner’s manual.)
  4. Remove the springs.
  5. Install the new lowering springs.
  6. Replace the shock nuts and bolts.
  7. Replace the rear tires [source: Do It Yourself].

What tools do I need to install lowering springs?

Tools To Install Lowering Springs

  1. Basic hand tools, including screwdrivers, pry bars, metric and fractional wrenches, metric and fractional sockets, ratchets, and extensions.
  2. Impact wrench, either electric or pneumatic.
  3. Floor jack and jack stands.
  4. Spring compressors.

Is it OK to put lowering springs on stock shocks?

Using stock shocks can make the ride bouncy When using lowering springs in conjunction with the OEM shocks, the car’s ride quality can also end up being bouncy. Additionally, installing a set of lowering springs on stock shock absorbers can also lead to premature wear.

Are Lowering springs a good idea?

Lowering springs also change the geometry of your wheel/tire fitment. If it’s not done right, you can expect both accelerated and uneven tire wear. Your car could also bottom out over speed bumps and be even tougher to get up inclines, like your driveway, without scraping your bumper.

Do I need alignment after lowering springs?

Yes, you will need an alignment after replacing springs – especially lowering springs. This is because to replace car springs, you need to first remove the shocks from the suspension system. And while doing so, you will work with many other suspension components like caster / camber plate that can cause misalignment.

How much should I lower my car?

You should lower your car for maximum 1.5 inches. This is the best height to have the aggressive lowered look and still be comfortable to ride. If you go even lower, the ride will not be stiff, you have a high risk of bottoming out and scraping against any driveways and speed bumps.

Does lowering a car damage it?

A lowered car may put extra stress on various other suspension and steering system parts, leading to excessive wear and even premature failure. Tires may rub against sheet metal or suspension parts, causing damage to both. The ride will almost always be harsher, as most lowering methods reduce spring travel.

Do you have to get new shocks with lowering springs?

Yes, if you install lowering springs then you need new shocks.