How do you get a box spring down stairs?
- Step 1: Remove the staples.
- Step 2: Reveal the boxspring.
- Step 3: Cut the wood supports.
- Step 4: Bend the boxspring around a fulcrum.
- Step 5: Fold the boxspring in half.
- Step 6: Reflatten the boxspring.
- Step 7: Reinforce the boxspring.
- Step 8: Staple everything back together.
Can I cut a box spring in half?
Introduction: Cutting and Folding a Box Spring If you don’t mind performing a little surgery, you can fold the box spring in half, making it much easier to move around. After rebuilding it, the box spring will still have all the structural integrity and support that it started out with.
Why can’t you put a box spring on the floor?
Most mattress types are built to sit on a slatted platform or box spring, not the ground. Mattress companies warn against sleeping on the floor as the ground is home to dust, bugs, and mold, all of which void warranties.
Can you put a box spring on a bed that doesn’t need one?
The short answer is no, you don’t need a box spring for your mattress! What you need is a foundation, which doesn’t necessarily have to be a box spring. In fact, you’ll be happier if you choose a box spring alternative instead.
What do you do when your box spring doesn’t fit?
If you lack the ability to cut your box spring, you may want to consider purchasing a new box spring or bed frame entirely. Specifically, you’ll want to purchase a bed frame that either can be assembled and disassembled as needed, a softer, folding box spring, or a split spring or frame.
How do you cover a box spring on the floor?
To cover a box spring, you can: Buy reusable box spring covers and wrap them around the box spring. Build a DIY frame around your box spring and upholster it. Apply stickers to a custom frame that you build for your box spring.
Can you sleep on just a mattress and box spring?
You don’t have to follow any rules in the bedroom except your own, so it’s as OK to leave your box spring and mattress on the floor as it is to mount your bedding into a conventional bed frame.
What happens if you don’t use a box spring?
With a collapsible metal frame, you would need a boxspring. Because there is no support for the mattress beyond the perimeter frame, without a boxspring, your mattress would receive insufficient support, not to mention most likely void the warranty.
How do you take apart a box spring and put it back together?
How to Take Apart a Box Spring in 4 Steps
- Step 1: Remove Reinforced Corners and the Dust Cover. Most box springs have plastic pieces stapled onto the corners for added protection.
- Step 2: Pull Staples Binding Fabric.
- Step 3: Remove the Fluffy Lining and Fabric.
- Step 4: Disassemble the Wood Frame.
What can you use instead of a box spring?
Top 12 Box Spring Alternatives Ideas for You
- Under Mattress Slats. In comparison to box springs and mattresses, slats are thinner and lighter.
- Putting the Mattress Directly on the Floor.
- Milk Crate Bed Case.
- Platform Bed.
- Adjustable Bed.
- Memory Foam Mattress.
- Hybrid Mattress.
- Wood Slat Foundation.
Can I take my BOX spring up the stairs?
And while maneuvering a mattress up a flight of stairs can be tricky, it’s nowhere near the headache that your box spring might cause, if it refuses to fit up the stairs. If you find yourself in this situation, there are a few options to try to get the box spring where it needs to go – though you’ll likely want a friend’s help to make it all work.
How do you attach fabric to a box spring?
Pull the fabric tight before fastening. You don’t need to attach them separately; one staple or tack through both fabrics will do. In retrospect, staples are the better choice because they are easier to remove if you ever need to move the box spring again.
How do you fix a box spring that won’t stay up?
Find the center of the box spring, and cut the dust cover with your scissors or knife. Tuck each half of the dust cover into the springs on either end to get it out of the way. Moving the top fabric out of the way, saw through the wood frame on each side. Your box spring is finally flexible!
Can you cut a box spring to fold it?
If you have a traditional wood-and-spring box spring and have the required tools handy, you can cut the box spring to allow it to fold. To do so, lay the box spring flat and use a pair of needle-nose pliers to remove the staples securing the top piece of fabric to the box spring.