How do you make a extruded cut on a curved surface in Solidworks?
Extruding Surfaces from a 2D or 3D Face
- Click Insert > Surface > Extrude.
- Select a face:
- Select other faces to define the extrude as required.
- Select the end condition.
- For 3D faces, select a plane, edge, 2D face, or sketch line to define the direction of extrusion .
How do you cut extrude to surface?
The Extruded Cut feature can be found on the features tab in the Command Manager interface as shown in Figure 1. You can also go to the toolbar and click Insert -> Cut -> Extrude to pull up the Cut-Extrude Feature menu as well.
How do you extrude a curved surface on shape?
- Create a sketch with the shape that you want on a plane. This plane needs to be above your part.
- Extrude Remove the sketch Up To the face of your part. While in the extrude menu, press the offset button to offset the extrude into your shape.
Can you extrude cut a surface solidworks?
Using the SOLIDWORKS Surface Extrude feature, we can extrude the boundary edges of a face of a solid body or edges of a surface body in a customized direction.
How do you create plane on SolidWorks?
Adding planes to SolidWorks is achieved using the Plane Wizard. The Plane Wizard can be accessed via Features > Reference Geometry > Plane on the command manager, or via Insert > Reference Geometry > Plane from the drop down menu.
What are the features of SolidWorks?
SolidWorks is a parasolid-based solid modeler, and utilizes a parametric feature-based approach to create models and assemblies. Parameters refer to constraints whose values determine the shape or geometry of the model or assembly.
How do I extrude cut?
Step-1: New Part File. Open the SolidWorks and New part File. If you don’t know it,read how to create new part File. Select the Plane (e.g.
How do you Sketch text in SolidWorks?
To sketch text on a part: Click a face of a part. Click Text (Sketch toolbar) or . In the graphics area, select an edge, curve, sketch, or sketch segment. In the PropertyManager, under Text, type the text to display. Set the properties in the Sketch Text PropertyManager as necessary. Click . With the sketch still open, extrude or cut the text.