How high can the Halvorsen loader reach for loading?
18 feet three inches
It is designed to load and unload cargo on military and civilian aircraft. It has a minimum height of three feet three inches and a maximum height of 18 feet three inches, which is five feet higher than the current loaders used.
How high can a 60k loader go?
The 60k Tunner is Yokota’s largest K-loader, vehicles designed to load and offload aircraft cargo. The 60k Tunners utilize hydraulics to adjust the height of the loading platform, up to 18.5 feet, and can support up to 60,000 pounds. Dennis drives and operates all of the 730 AMS K-loader models.
How much does a 60k Tunner weigh?
Weight (unloaded) 29,484 kg / 65,000 lbs.
Why is it called K loader?
Shortly before he landed at the Tempelhof Airport, Halvorsen would drop candy attached to the parachutes to children living near the site. Since children couldn’t tell one plane from another, Halvorsen would wiggle the wings of his plane. That led to his nickname, “Onkel Wackelflugel” or Uncle Wiggly Wings.
How much does a 60K Tunner cost?
Air Force personnel use the 60K Tunner to load cargo onto large aircraft. The contract required Systems & Electronics, Inc. to provide all of the logistics support needed for the cargo loader for eight years at an estimated total cost of $158 million.
How long is a 60K Tunner?
Length: 49.3 ft. Deck Height (variable): 39 in. to 18.5 ft. Turning Diameter: 98 ft.
Who was General Tunner?
officer
William Henry Tunner (July 14, 1906 – April 6, 1983) was a general officer in the United States Air Force and its predecessor, the United States Army Air Forces….
| William H. Tunner | |
|---|---|
| Birth name | William Henry Tunner |
| Nickname(s) | Willie the Whip Tonnage Tunner |
| Born | July 14, 1906 Elizabeth, New Jersey, U.S. |
What is AK loader?
Container loaders, also known as cargo loaders or “K loaders”, are used for the loading and unloading of containers and pallets into and out of aircraft. The loader has two platforms which raise and descend independently. The containers or pallets on the loader are moved with the help of built-in rollers or wheels.
What is belt loader?
Belt loaders are vehicles with an attached conveyor belt that is used for loading and unloading baggage from an aircraft. The loader is positioned at the opening of the baggage compartment, the baggage is loaded on the belt, and it is carried to the entrance where it is loaded.
Who is the 60k Tunner named after?
A name-the-60k contest voted to call it the Tunner, after General William H. Tunner who directed the Burma Hump, Korean, and Berlin Airlifts.
Who were the pilots in the Berlin airlift?
These men, Chuck Childs and Gail Halvorsen, and many others flew what is known today as one of the greatest humanitarian acts of the twentieth century. Through the Berlin Airlift, millions of tons of supplies were dropped to save two million people from starvation.
What is GSE technician?
The GSE Technician is responsible for the maintenance of all assigned GSE and other vehicles required for the performance of the support contract. Principle Accountabilities. Establishes and keeps records on the repair and operational readiness of the assigned equipment.
What is a Halvorsen loader?
The Halvorsen Loader is a rapidly deployable, high-reach mechanized aircraft loader that can transport and lift up to 25,000 pounds of cargo and load it onto military and civilian aircraft. The loader built by JBT AeroTech (formerly FMC Airport Systems) is highly mobile and can transport a full load of cargo at a maximum speed of 17 mph.
How long can the Halvorsen be deployed?
The Halvorsen is worldwide deployable and can operate in forward operating locations for up to 60 days without base-level maintenance facilities. The Halvorsen Next Generation Small Loader (NGSL) is can support all military transport and Civil Reserve Air Fleet aircraft.
What is the height of a cargo loader?
It is designed to load and unload cargo on military and civilian aircraft. It has a minimum height of three feet three inches and a maximum height of 18 feet three inches, which is five feet higher than the current loaders used.
Can a 25k loader lift a C-5?
Although the 25K loader interfaces with C-5, C-17, C-130, C-141, and KC-135 aircraft, its 13-foot maximum lifting height is a serious limiting factor when the Air Force employs Civil Reserve Air Fleet (CRAF) wide-body aircraft requiring a reach of 18 feet, 4 inches.