How much does floor leveler weigh?
Because self-leveling underlayments are applied much thinner, they add less dead load. The minimum 1-1/2” thickness of light weight concrete weighs 12 to 13 pounds per square foot whereas 1/4″ cement self-leveling underlayment weighs about 2lb/sft.
How much does a 50 lb bag of self leveler cover?
Coverage: One 50 Lb. bag will cover approximately 40 Sq. Ft. at 1/8 In.
How much floor leveling compound do I need?
The amount of floor leveling compound you will need depends on the size and depth of the dips you’ll be filling or the thickness of the topping you plan to install. This is a rough guide based on leveling 100 square feet to various depths: 1/8” – 100 to 120lbs of mix. 1/4″ – 200 to 240lbs of mix.
What is the lightest floor leveler?
Level-Set® LW-60 Ultra-Lightweight Self-Leveling Underlayment. It is a unique, ultra-lightweight, self-leveling underlayment that provides a flat, smooth, durable surface for finished flooring installation, at half of the weight of a conventional portland cement or gypsum-based underlayment–just 60 pounds/cubic foot.
Is there a lightweight floor leveler?
LEVEL MAGIC LIGHTWEIGHT is a cement-based, self-leveling, high strength underlayment designed for leveling floors without adding the weight of traditional cementitious leveling products. LEVEL MAGIC LIGHTWEIGHT can be featheredged and has properties similar to that of concrete, but at a much lower load weight.
How much does a bag of self leveling compound cover?
Covers approx. 6m² at 3mm thick.
What area does a bag of self leveling cover?
Sealed coverings such as vinyl can be laid on top of the surface just 90 minutes after application. A 20KG bag will cover 5m² at 3mm, 3.1m² at 5mm, 1.5m² at 10mm and 1m² at 15mm. Both porous and non-porous surfaces should be primed using BAL Primer and finished with a spiked roller to achieve the perfect finish.
How thick can you pour self-leveling concrete?
QUIKRETE® Self-Leveling Floor Resurfacer (No. 1249-50) can be installed from 5/8 inch (16 mm) thick to a feather edge. For areas deeper than 5/8 inch (16 mm), apply QUIKRETE® Self-Leveling Floor Resurfacer (No. 1249-50) in layers no greater than 5/8 inch (16 mm) each.
How much does a bag of Levelling compound cover?
Coverage: 20kg will cover 4M2 at 3mm depth. 64 bags per pallet.
How many bags of self-leveling do I need?
Self-Leveling Underlayment (35 Bags/Pallet)
What is the maximum depth for self Levelling compound?
Most levelling compounds can only be applied up to 30-40mm and will need to be used in more than one application or with other materials required. However there are some exceptions on the market such as BAL Level Max which can be applied from 2 mm up to 80 mm in one application.