What app do I use for Uniden Guardian?

What app do I use for Uniden Guardian?

Gurardian app for Android based smartphones and iPhones and how to use them with your system.

How do I connect my Uniden Guardian to my phone?

A: Go to Settings > Camera > Pairing. Press the number of the camera to pair, then press the pairing button on the camera within 30 seconds.

How do I setup my Uniden app camera?

From iOS Settings/WiFi, select your AppCam and enter 12345678 (default password) to connect to the camera. Open the Uniden AppCam Lite app. Select Tap here to add camera. Follow the prompts until the app asks you to verify that you are connected to the camera’s WiFi.

Why won’t my Uniden camera connect?

Make sure the camera is properly powered on. Make sure the WiFi router has enabled SSID broadcasting. The camera does not find the router to connect to Make sure you selected the correct router in your device WiFi setting. Make sure you entered the correct password for the router you selected.

How do I find my Uniden baby monitor password?

If you forgotten the password, please press and hold the reset button at the back of the App Dock for 5 seconds. Tap on the Advanced Setting option to display the Advanced Setting screen below. Tap on the Change Password option to key in and confirm the new password.

How do I update my Uniden Guardian firmware?

UDVR/UNVR series and the Guardian B & G series.

  1. Download the firmware to a USB2. 0 compatible flash drive.
  2. Insert the flash drive into the “rear” USB2. 0 slot of the DVR.
  3. Restart your DVR/NVR.
  4. The screen should say “Updating” instead of the Uniden logo. When completed, the system will reboot itself.

How do I connect my security camera to my phone?

HOW TO CONNECT CCTV TO ANDROID OR IPhone?

  1. Step 1: CONNECT DVR TO MONITOR DIRECTLY.
  2. Step 2: CONFIGURE CCTV DVR SETTINGS.
  3. Step 3: NOW CONFIGURE WIFI ROUTER FOR DVR.
  4. Step 4: CONNECT DVR TO WIFI VIA LAN CABLE.
  5. Step 5: CHECK THE SETTINGS.
  6. Step 6: NOW CONNECT TO ANDROID PHONE.

How do I connect my DVR to my phone?

Starts here6:00How to connect to a DVR using an Android Phone – YouTubeYouTube

How do I install Uniden Guardian?

Starts here1:21Uniden Guardian – Setting up the DVR – YouTubeYouTube

How do I reset my Uniden camera?

Reset Camera To rest the camera, use the provided reset needle to hold the reset button for 5 seconds. A voice prompt “ factory resets succeeds ” indicates the camera has been reset successfully.

Why is my Uniden camera offline?

Your camera may lose connection with our servers or the internet on some occasions. The camera is designed to automatically reconnect once there is internet available. If the camera is still offline, there may be a problem with your home network. You can reset your home router and/or modem.

How do I connect my Uniden baby monitor to WIFI?

To pair a device, tap the “Add Device” button or the “+” button on the top right-hand side of the screen if you already have shared access or a paired device. Once you have tapped the Add Device button, tap the Baby Monitor icon to set up the BW140R camera.

What is the Uniden Guardian 2 Remote app?

Uniden Guardian 2 Remote app allows you to view live video from your Uniden Guardian Surveillance system. From anywhere in the world you have 3G or higher phone access or WiFi access, you can view your cameras live. This version of the app is required for Guardian firmware version A0.3.5 or higher.

How does Uniden appcam work?

Uniden AppCam provides access to your live video from your Uniden AppCam cameras from anywhere with Internet access. Multiple cameras can be added for remote viewing. The snapshot feature captures a still image of your video to your smartphone or tablet. View recorded video files remotely from the cameras microSD card. Need more than one user?

Who is the developer of the Uniden iOS app?

The developer, Uniden Corporation, has not provided details about its privacy practices and handling of data to Apple. For more information, see the developer’s privacy policy. The developer will be required to provide privacy details when they submit their next app update. Requires iOS 7.0 or later.

What version of the Guardian app do I need to use?

This version of the app is required for Guardian firmware version A0.3.5 or higher. If you have Guardian firmware version V 1.5.5, you can upgrade to the latest firmware and use this app. Upgrade your firmware at http://www.unidenvideo.com