What does E2 mean on Samsung washing machine?

What does E2 mean on Samsung washing machine?

The E2 error in Samsung washing machines informs the user about water draining problems. For some reasons, the device can’t drain the waste of water. Besides, it can report about unhurried discharge. So waiting time for draining is exceeded.

What does 2E mean on a Samsung dryer?

Voltage errors (9C1, 9E, 2E, 9E1) If you get this error, check that the dryer is on its own circuit and not using an extension cord.

How do I reset my Samsung washing machine error code?

What you can do instead is power cycle it: Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the washer (usually 1 to 5 minutes at most), and then power it up again. This is the closest you can get to a “reset” of the washer.

What does F5 and E2 mean on a washing machine?

The F5 E2 alert indicates the washer can’t engage the lid lock because there may be an obstruction in the lid lock area. Please check the lid lock area and remove any objects in that area. Also verify there are no clothing items in the way.

What are the codes on a Samsung washer?

Samsung Front-Load Washer Fault Codes

Fault Code Washer Problem
LE Low water level during cycles
OE Overflow or too high water levels
nF1 Hot and cold water lines are reversed
tE Water temperature is either too high or too low

What does eo2 mean on washing machine?

E02 – the machine has failed to fill with water during its allocated time. Check the mains water pressure, by turning on the sink taps and checking for the usual pressure, if this is ok check the inlet hose for kinks, the pressure switch and inlet valve.

What is E2 error?

The E1 or E2 error code is an Auto-Stop Protection Error, indicating an issue detected by a sensor. This error code will require service. The E3 error code displays when an Abnormal Operation Protection Error has occurred, and activates to protect the unit from damage.

How do I clean the heat exchanger on my Samsung dryer?

How to clean the heat exchanger on a dryer

  1. 1 Gently press the top part of the outer cover (A) to open.
  2. 2 Unlock the levers (B).
  3. 3 Remove the inner cover (C).
  4. 4 Clean the heat exchanger with the cleaning brush provided.
  5. 5 Clean the inner cover with a smooth damp cloth.

How do you reset the ventilation sensor on a Samsung dryer?

Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the dryer (usually 1 to 5 minutes at most), and then power it up again. That’s it. That’s all it takes to reset.

What is Le error in Samsung washing machine?

The main reason for the LE error code in Samsung washing machine. The LE fault ‘s appearing on the screen signals about the leaking tank. The manufacturer repeatedly changed the error codes. Some Samsung front load washer models show the LE1, Е9 (devices, manufactured before 2007) or the LC error code.

How do I stop my Samsung washing machine mid cycle?

Press the “Start/Pause” button on the front of your washing machine and wait a few minutes for the washer to safely drain away water in the drum before it unlocks the door. Once this is done, you’ll be able to open the door and add/remove items or make chances to the cycle.

https://www.youtube.com/watch?v=zZoe0Q_ti5s