What does V 5 Mean on a trailer hitch?
Class V Hitch: A Class 5 trailer hitch can handle a GTW over 10,000 lbs. and a maximum tongue weight over 1,200 lbs. This type of hitch is usually a weight-distributing hitch, used for extra heavy loads like a car trailer, horse trailer or a large boat or camper.
What is a Class 5 hitch rated for?
Hitch Class Comparison Chart
| Hitch Class | Common Applications | GTW Capacity (lbs.) |
|---|---|---|
| Class 3 | Crossovers, vans, SUVs and trucks | Up to 8,000 |
| Class 4 | Trucks and SUVs | Up to 10,000 |
| Class 5 – Xtra Duty | Trucks and SUVs | 16,000 to 17,000 |
| Class 5 – Commercial Duty | Dually and chassis cab trucks | 18,000 to 20,000 |
What size is a Class 5 hitch?
CLASS 5: Class 5 receivers are the highest weight ratings and can range between 2.5” and 3” receiver sizes. They are usually found on heavy duty full-size trucks and commercial trucks. The 2.5” receiver is rated up to 18,500 lbs.
What is the difference between a Class 4 and Class 5 hitch?
Class IV is going to be a 2 inch hitch opening that has tongue weights typically up to 1,200 lbs and total trailer weight of 12,000 lbs. For a Class V hitch the capacities bump up to 20,000 lbs for the total trailer weight and 2,000 lbs tongue weight.
What is a Class V receiver?
A Class V hitch has a 2-1/2″ square receiver opening. Your ball mount and hitch ball need to both be rated for Class V to safely tow these weight loads. To use this class of hitch for weight distribution requires a weight distribution system. Class V hitches attach to the vehicle frame only.
Which tow hitch is best?
- Editor’s Pick: CURT 13333 Class III Trailer Hitch.
- Reese Towpower Class III Starter Kit.
- CURT 13146 Class III Trailer Hitch.
- CURT 14301 Class IV Trailer Hitch.
- CURT 13432 Class III Trailer Hitch.
- Connor 1623750 Tri Ball Trailer Hitch.
- Weigh Safe LTB6-2.5 Drop 180 Hitch.
- Towever 84180 Class III/IV Ball Mount Trailer Hitch.
How much weight can a 2 inch ball pull?
3,500 pounds to 12,000 pounds
The 2-inch ball is used on a variety of popular trailers, such as boat trailers, utility trailers and campers. 2-inch trailer balls have a wide weight capacity range from 3,500 pounds to 12,000 pounds gross trailer weight.
How do I know if my hitch is Class 1 or 2?
Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue weight rating of 350 pounds and a towing rating of 3,500 pounds.
Which weight distribution hitch is best?
- Editor’s Pick: Andersen 3344 No Sway Weight Distribution Hitch.
- EAZ Lift 1,000 lbs Elite Bent Bar Weight Distributing Hitch.
- Fastway Equal-i-zer 4-Point 10,000-pound Sway Control Hitch.
- Husky Round Bar Weight Distribution Hitch with Bolt-Together Ball Mount/Shank Assembly.
What size hitch should I get?
The best way to measure your receiver hitch tube is to measure inside of the tube to inside of the tube. This will help you know what size ball mount you need to get for your hitch. It may be 1-1/4″ common on cars and cuvs. Most likely it is either a 2″ or 2-1/2″, which is often found on most SUV and pickup trucks.
How close should you get to max towing capacity?
The “80 Rule for Towing” states you should never exceed 80 percent of your vehicle’s max tow capacity, which is set by the vehicles manufacturer. So for example, if your tow vehicle has a max towing capacity of 5,000 pounds, you would not want to pull or tow anything heavier than 4,000 pounds.
Can you turn a hitch upside down?
If you turn the hitch upside down and mount the ball in the 6 inch rise position it would tilt the trailer tail end down and raise the receiver 6″ higher than the mount. You would generally use this on lifted or 4×4 vehicles in order to get proper towing height. You want this hitch if you have a truck that is high up.
What kind of hitches does Valley offer?
Valley Trailer Hitches offer more then just your standard Class 1 hitch, Class 2 hitch or Class 3 hitch, they also offer fifth wheel hitches and gooseneck hitches for your big trailer needs. Not towing a trailer? Valley also offers roof racks, luggage carriers, storage backs, Hitch mounted bike racks and cargo carriers too.
What kind of towing accessories does Valley offer?
With a large line of towing accessories, valley offers steel trailer balls, hitch pins, hitch locks, towing t-connectors, trailer brake controls and the correct trailer wiring harness as well as ball mounts so you can get everything you need to tow safely. In need of additional cargo space, add a Hitch Basket.
What accessories does valvalley offer?
Valley also offers all of the accessories that you need to get yourself towing! Valley makes hitches for cars, trucks and SUVs. Hitches are sold by Class, the smaller the Class number- the less towing capacity and gross trailer weight it will safely tow.
Do you have to drill out trailer hitches?
Most trailer hitches are custom fit hitches and also bolt on styles, so no drilling is required. With over 400 receiver trailer hitches, Valley has hitches to cover most vehicle models. Valley Hitches has been a trusted name in towing products for nearly 60 years.