What is a fuser error on a Brother printer?
The message ‘Fuser Error’ or ‘Self-Diagnostic’ indicates the fuser unit is too hot, too cold, or is not heating up fast enough. It is a mechanical malfunction of the Brother machine and the machine will need to be reset.
How do I know if my printer fuser is bad?
Streaking, smudging, black lines, and double images are all symptoms of a bad fuser. When you notice these printing defects and experience problems, such as paper jams or wrinkles, this is a good sign to replace the fuser kit.
How do you reset the fuser on a Brother MFC l8900?
Tap 88 on the display to enter the “Reset counters for consumable parts” mode. Tap the up arrow on the display until you see “Reset – Fuser Unit.” Tap Mono CopyD on the display. ”Fuser OK” should appear on the display. Tap Mono CopyD again to confirm resetting the fuser counter.
How do you reset a fuser?
Reset Fuser
- Press the [Machine Status] button on the Control Panel.
- Select the [Supplies] tab on the Touch Screen.
- Select the [Fuser] button.
- Select the [Reset Counter] button and then the [Yes] button to reset the Fuser.
- Select the [Close] button to return to the default (Copy) screen.
How do you reset the fuser on a Brother MFC 9330cdw?
Use this procedure to reset the fuser counter: On the display, set 8 8 -> this will show the “Reset-Fuser Unit” Touch the “SET” key on the display, twice. Then touch the “Stop” key on the display. Finally, enter the combination 9 9 on the printer num pad (not in the display) and the printer will restart.
How do I clear the message self diagnostic?
The error message SELF-DIAGNOSTIC – Will Automatically Restart within 15 minutes appears when the machine is not detecting the proper temperature in the fuser unit. This message may clear after turning the machine off using the power button on the control panel and unplugging the power cord.
How do I fix my Brother printer self diagnostic?
To reset the Brother machine:
- Press and hold down the Power key to turn the machine off.
- Unplug the power cord from the back of the machine.
- Wait approximately 30 seconds.
- Press and hold down the Power key to turn the machine on.
- If the display reads ‘Ready’, the problem is resolved.
How long does a fuser last?
You can keep printing approximately 1,000 pages until the next message appears. When the “Change Fuser Unit” message appears, replace the fuser unit. The life expectancy of the fuser unit is up to 60,000 pages for A4 simplex printing.
How long does a fuser last in a Brother printer?
The fuser is a part of laser printers that bonds the toner and paper together using heat and pressure. Fusers need to be replaced every 75,000 – 300,000 pages depending on the printer model.
How can I reset my PF Kit 1?
7) The PF Kit life counter needs to be reset to clear the “Replace PF Kit” message. To do this, press the GO and + buttons at the same time until “Reset Parts Life” is displayed. Now press the + button until PF Kit 1 or 2 is displayed and press SET. The counter will now be reset.
What does the message ‘fuser error’ mean on my Brother machine?
The message ‘Fuser Error’ or ‘Self-Diagnostic’ indicates the fuser unit is too hot, too cold, or is not heating up fast enough. It is a mechanical malfunction of the Brother machine and the machine will need to be reset. 1. Press and hold down the Power key to turn the machine off.
Why is the temperature of the fuser unit of my Kenmore washer high?
The temperature of the fuser unit does not rise to a specified temperature within the specified time. The fuser unit is too hot. Turn the machine’s power switch off, wait a few seconds, and then turn it on again. Leave the machine for 15 minutes with the power on.
What does the message ‘fuser error’ or ‘self-diagnostic’ mean?
The message ‘Fuser Error’ or ‘Self-Diagnostic’ indicates the fuser unit is too hot, too cold, or is not heating up fast enough. It is a mechanical malfunction of the Brother machine and the machine will need to be reset. 1. Press and hold down the Power key to turn the machine off. 2. Unplug the power cord from the back of the machine.
What should I do if the fuser unit is too hot?
The fuser unit is too hot. Turn the machine’s power switch off, wait a few seconds, and then turn it on again. Leave the machine for 15 minutes with the power on. If the error still remains, please contact Brother Customer Service from “Contact Us” or call your dealer and report the error status, Fuser Error or Self-Diagnostic.