What is the metal part of the sink called?

What is the metal part of the sink called?

Escutcheon: This metal piece sits on top of sink and covers the holes that connect to your pipes and faucet handles. Spray hose: This connects the water supply to the faucet as a whole. It also connects your handheld sprayer to the water supply if your sink is fitted with one.

Do I need plumbers putty for sink drain?

Increasingly, I’m finding that plumber’s putty is not recommended for sink drains, especially if it has its own rubber gasket. In places where the manufacturer does not supply a gasket (and the flange is not metal) they suggest silicone caulk. Be sure to read the directions for your drain assembly!

How do you connect galvanized pipes without threads to PVC?

Connecting Galvanized and PVC Drain Pipes If you have to make a transition in the middle of a pipe, you can do it without re-threading the pipe. Simply cut the pipe with a hacksaw, making as straight a cut as possible, then fit a Fernco flexible connector with the appropriate diameter over the end and tighten it down.

What are the parts of a sink drain kit?

The components making up the sink drain kit include rubber-seal washer, a fastening nut, basket strainer, friction-protection band, and a tailpiece that connects the drainpipe and the kitchen sink drain. You should ensure that the tailpiece also matches the size of your drainpipe.

How do you put a drain in a kitchen sink?

Insert the top half of drain insert into the hole in the sink bowl. Firmly press down, compressing the plumbers putty. Apply rubber gasket, cardboard ring and metal fastener to the underside of sink drain and tighten.

How to install ABS pipe-metal sink drain connector?

Prepare a brass drain attachment by inserting the pipe into the fastener and lay plastic gasket inside opening. 2. Loosen the fastener on the ABS pipe-metal sink drain connector and insert the brass pipe into it. Attach brass fitting to sink drain and tighten.

How do you install a basket strainer in a kitchen sink?

Start by adding plumber’s putty to the underside of the basket strainer and fit it into the drain hole at the bottom of the sink. Then, tighten the nut with a basket wrench to secure it in place. You can then fit a brass tailpiece onto the bottom of the basket strainer, reconnect the drainpipes, and you’re done!