What stock is on the Remington 700 5R?
Fits: Remington 700 right hand, short action BDL with varmint barrel contour. (This is the same stock that is offered on the current Remington Sendero & 5R rifle.)
What is Remington 5R?
Built off the legendary 700 action, the Remington 700 5-R sets the benchmark for accuracy and durability. Much like M-24, the barrel is cold hammer forged and features 5-R rifling. The 5R rifling profile increases barrel life expectancy, accuracy and creates less fouling and bullet deformation over time.
What is a Remington 5R barrel?
What is 5R Rifling? 5R is an improvement over conventional rifling by changing the shape and configuration of the lands and grooves. Conventional rifling has sharp 90-degree corners from the top of the land to the bottom of the groove. 2. Conventional rifling has lands and grooves opposing one another.
What does a blueprinted action mean?
What is Action Blueprinting? Blueprinting or truing a rifle action is when all the critical aligning surfaces of the action are machined to be square with the action center line. This ensures that all the locking faces has maximum parallel contact once the cartridge is chambered.
What is a blueprinted bolt?
An alternative is to build a gun using a blueprinted factory action—an action that has been re-machined to bring critical surfaces into perfect alignment. Some of the tools used to blueprint a rifle action. Such actions are capable of delivering impressive accuracy.
Who invented 5R rifling?
Well buckaroos…. less than 10 years ago, “5R Rifled” barrels were introduced, and the gun world changed!!! The advent of 5R Rifling can be credited to Barrett “Boots” Obermeyer. “Boots” was a U.S. Army veteran who cut his teeth in the target shooting community over the years.
What is a 5R groove?
Definitions. 5R is a 5-groove rifling pattern with sloped or angled sides to the lands. All rifling has a certain amount of angle to the sides of the lands as a natural effect of the rifling process. The sides of the grooves are parallel, but the sides of the lands are not and the 5R carries this to an extreme.
What is the most accurate rifling method?
Button-rifled barrels can be extremely accurate; more bench-rest records are held by shooters using guns with button-rifled barrels than by any other type. Button-rifled barrels are very common on modern centerfire and rimfire guns.
What is a blueprinted rifle?
Blueprinting or truing a rifle action is when all the critical aligning surfaces of the action are machined to be square with the action center line. This ensures that all the locking faces has maximum parallel contact once the cartridge is chambered.
What does factory blueprinted mean?
Blueprinting means following a set of specs to the “T”. Most serious race engines such as Indy, NASCAR, Formula 1, etc. 00275″ main bearing clearance where as a the factory specs say anything from . 0015 to . 0030″ is “within spec”.
What is a factory blueprinted action?
What is a Remington 700 milspec 5R rifle?
The Remington 700 Milspec 5R rifle was first introduced as a limited edition rifle back around the turn of the 21st century, and ever since then it has been of keen interest to many shooters.
What kind of action does a Remington 700 have?
The action is a standard Remington 700 action though in this case it is stainless steel to match the barrel. Like most Remington 700 actions, this one was very smooth and nice to operate. The bolt handle, floorplate, extractor, box magazine, etc are all standard Remington 700.
What is the difference between a Remington M24 and Remington 700?
The M24 has a much heavier contour, similar to a #8 or so, so that is a noticeable difference. The action is a standard Remington 700 action though in this case it is stainless steel to match the barrel.