Where is the Ford 6000 CD code?
The serial number of any 6000 CD RDS E-O-N can be found on the label attached to the radio box. To see this label, you must partially remove the radio. All 6000 CD units have their serial number written on the box label, which becomes visible when the radio is removed.
How do I get the code for my Ford Ka radio?
You can unlock the radio in your Ford KA car from the seven digit serial number beginning with M or V. You will find the serial number printed on a label or by pressing 1 & 6 on the radio. All Ford KA Radio Codes are shown instantly on screen.
How do I unlock my Ford radio without the code?
Turn on your radio and see if it displays CODE or LOC. If it does, turn off the radio. Press and hold down the audio power button together with the SEEK button for about 50-60 minutes. Then, it will turn on without entering the radio code.
How many digits is a Ford radio code?
All you need is the radio serial number that you can find by holding down buttons 2 and 6 for a few seconds. You will see a serial number M followed by six digits.
How do I unlock my Ford Mondeo radio?
You can unlock the radio in your Ford Mondeo from the seven digit serial number beginning with M or V. You will find the serial number printed on a label or by pressing 1 & 6 on the radio. All Ford Mondeo Radio Codes are shown instantly on screen.
How do you enter a Ford Ka code?
- Switch Radio On – Display Shows ” Enter Keycode”
- Enter CODE in the order it is read :
- For Example, to Enter Code 1234.
- Press Preset 1 then 2 then 3 then 4.
- If the correct code number is now shown.
- Press the Star Button ” * ” To Enter.
Why does my Ford radio say wait?
My radio says WAIT The WAIT message appears after entering an wrong code. To remove it, all you have to do is leave the radio on for 30 minutes.
How do I reset my car radio after I change the battery?
Syncing the Radio
- Turn the ignition key to the “On” position, but don’t start the engine.
- Turn the radio on by pressing in on the volume control knob. After 10 seconds, turn the radio off. Press and hold the power button for two to five seconds and watch the radio display.
How do I find my radio code?
The best place to locate a radio code is in the owner’s manual of your car. In most cases, the owner’s manual will be located in your glove box and will include general automotive service and maintenance tips, along with instructions on how to operate each system on the vehicle.
How do I reset my Ford radio?
Resetting the system To reset the system: Simultaneously press and hold the Seek up and the Audio Unit Power buttons until the screen goes black. Wait three minutes to allow the system to complete the reset.
How do I enter a Ford 6000 CD radio code?
How to enter Ford 6000 CD code. Enter your 6000 CD radio code using the one to four buttons. If we have to enter the code 5723 for example, we do it like this: we repeatedly press button 1 for five times, button 2 for seven times, button three twice and button 4 for three times. To confirm the code, we press button 5.
How do I find the serial number on a Ford 6000?
How to find Ford 6000 CD serial. Find the serial number for your 6000 CD radio on-screen on 2004 or newer models or on the back label on older models (RDS E-O-N). To print the V series on display, you must turn on and press both buttons 1 and 6.
How do I find the serial number on a 6000cd radio?
You can calculate the code for your 6000CD radio from the serial number that you can find on the screen or rear label. To make the serial appear on the screen, press and hold buttons 1 and 6 for three seconds. In the cycle that begins, the serial number appears last with this format V123456.
When did the Ford 6000 CD v RDS EON come out?
The first one, 6000 CD RDS EON (1998 – 2004), doesn’t display the serial on the screen. You should remove it. The second, fabricated between 2004 and 2008, sometimes shows it, others times not. Only the newer version, made from 2008 to 2015 shows every time the serial on the screen. Is Ford 6000 CD v code generator free?